Sector - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Fixed Display

6-2-6 Sector

Operation procedure
Terminology
Property setting
144
S To tile a rectangle, paste a tiling element into it.
Polygon
Tiling element
For details of tiling elements, refer to 6-2-8 Tiling.
A sector is drawn.
Sectors cannot be used with NT11S/NT11, NT20, NT20S and NT600S.
(1) A sector is drawn. The size of a sector can be changed.
Selection using the menu bar:
Selection using the drawing toolbar:
Center point
Start point
General
Position
Center point: Indicates the position of the center of a sector.
Start point: Indicates the position of the start point of a sector.
End point: Indicates the position of the end point of a sector.
A sector is drawn anti-clockwise from the start point to the end
point.
Size: Indicates the radius of a sector.
[Objects] [Fixed Display]
End point
Section 6-2
[Sector]