Input Notify Touch Switch - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Touch Switches

6-8-1 Input Notify Touch Switch

Settings
214
To display a label, set a check mark in the check box of the [Label] property and
click on . The dialog box for setting a label is displayed. Set the prop-
erty for the label to be displayed.
For the procedure for setting the properties, refer to 6-2-7 Text. When using the
NT21, NT31, NT31C, NT631, and NT631C, it is possible to set different colors for
the lamp ON and lamp OFF states. With these models, however, it is not permis-
sible to insert image data.
button in the property dialog can copy the I/O comment set to the
PLC address as a label.
In case of Notify Bit function:
In case of other function:
S To edit the position of a label, use the element edit function. (For details, refer to
page 110.)
(1) Click on the label while pressing the Shift key and Ctrl key.
(2) Drag the label to change the display position.
(1)
Function: Notify bit
Address
PC (PLC) Bit Address:
I/O comment:
I/O comment of notify bit
I/O comment of lamp bit
(2)
Specify the PC (PLC) bit that is driven ON/OFF ac-
cording to the operation of a touch switch.
Specify the comment of the PC (PLC) bit that is
driven ON/OFF according to the operation of a
touch switch.
Section 6-8