Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 66

Operation of Screen Data (Application) File
Note
52
Comments
Set a comment concerning the area set as the PT Status Notify Area.
As a comment, a character string of up to 16 characters can be set.
Window Control Area
PC (PLC) Address
Set the type of words at the PC (PLC) and the first address (word number) of
the area used as the Window Control Area.
Window Control Area differs depending on the PT model and it occupies the
following number of words.
NT21 and NT31, NT31C, NT631, NT631C with "-V1" or "V2": 9 words
Other models: can not be used
Comments
Set a comment concerning the area set as the Window Control Area.
As a comment, a character string of up to 16 characters can be set.
Set memory addresses so that the PT Control Area, PT Notify Area and Window
Control Area do not overlap.
S PC (PLC) Address dialog box
Clicking on the [Set] button in the [PT Control Area], [PT Notify Area] or [Win-
dow Control Area] displays the PC (PLC) Address dialog box.
In the PC (PLC) Address dialog box, the PC (PLC) address of the PT Status
Control Area, the PT Status Notify Area and the Window Control Area can be
set by specifying the area type and address individually. The setting made in
the PC (PLC) Address dialog box will be reflected on the setting made in the
[PC (PLC) Control Area], [PT Notify Area] or [Window Control Area].
Use the PC (PLC) Address dialog box only when the area type and address are
input individually. If the PC (PLC) address is directly input in the Control/Notify
Area page, it is not necessary to call this dialog box.
Example PLC Vendor: OMRON
Channel (Word)
Specify the type of PC (PLC) area that is used as a PT Status Control Area, a
PT Status Notify Area or a Window Control Area by selecting an item from the
drop-down list box.
Address
Specify the first word address in the PC (PLC) area that is to be used as the PT
Status Control Area, PT Status Notify Area, and Window Control Area.
Section 3-3