Rectangle - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Fixed Display
Guidance

6-2-3 Rectangle

Operation procedure
End point: Indicates the position of the end point of an arc.
An arc is drawn anti-clockwise from the start point to the end
point.
Size: Indicates the radius of an arc.
Attribute: Specify the display attribute.
Standard, Inverse, Flash, Inverse Flash
Color
Foreground: Specify the line color.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
S An arc is defined by the center point, the start point, and the end point
The line type is specified using line style attribute.
Center point: Indicates the position of the center of an arc.
End point: Indicates the position of the end point of an arc.
The end point can be dragged to the desired position.
Start point: Indicates the position of the start point of an arc.
When the start point is dragged, the start point position and
arc radius are changed.
A rectangle is drawn.
Rectangles cannot be used with NT11S/NT11, NT20, NT20S and NT600S.
(1) A rectangle is drawn. The length of a vertical and horizontal sides can be
changed.
Selection using the menu bar:
Selection using the drawing toolbar:
Section
[Objects] [Fixed Display]
[Rectangle]
6-2
139