Table of Contents
Advertisement
Touch Switches
6-8-6 Copy Setting Touch Switch
Settings
Guidance
Note
220
Function:
Copy setting
Copy From
Numeral Table:
Specifies a numeral table entry for the copy source.
String Table:
Specifies a character string memory table entry (string
table) for the copy source.
Code:
Specifies copying a constant (numeric data).
Data setting field: Specify the memory table entry number when a numeral
table entry or a character string memory table entry
(string table) is specified. When code is specified, specify
a constant here.
Copy To
Numeral Table:
Specifies a numeral table entry for the copy destination.
String Table:
Specifies a character string memory table entry (string
table) for the copy destination.
Cursor Position:
If this is specified, the numeral input field or the character
string input field, which is the active input objective, is se-
lected for the copy destination.
Data setting field: Specify the memory table entry number when a numeral
table entry or a character string memory table entry
(string table) is specified. If Cursor Position is selected,
this field is invalid.
:
Displays the list of numeral/character string memory
table entries (string table).
S A copy setting touch switch is used in the cases shown below.
Copying the data in a memory table entry to another memory table entry
Character string memory
table (String table)
SET 1
SET 2
SET 3
By setting the data in several memory table entries beforehand, the necessary
data can be copied to the work area as needed.
Data copying from a memory table entry to a memory table entry is possible only
between memory table entries of the same type; from numeral memory table
entry to numeral memory table entry, and from character string memory table
entry (string table) to character string memory table entry (string table).
part1
part1
part2
part3
Section
6-8
Hide quick links:
Advertisement
Chapters
Table of Contents
