Image Editor; Operating The Image Table - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Image Editor

8-1

Image Editor

Reference: Image editor has the following features.

8-1-1 Operating the Image Table

322
The procedure for creating images of any required shape in the bit map (BMP)
format is described below.
The bit map format graphic data that has been created using a Windows-based
general purpose application software can be pasted onto the image creation
screen by using the image editor via the clip board.
Created image data can be inserted into a character string in an image/library
lamp display, alarm list display, alarm history display, or character string display.
With the NT21 and NT31/631 without NT20/30/620-compatible mode, it is not
possible to insert image data into a character string.
S You can draw any graphics in the bit map format freely.
S It is possible to import Image data from the different screen data file.
S Selected image data can be expanded or shrunk.
S The bit map file can be pasted onto the image editor.
S Copy, cut, paste operation of image data is possible.
S Preview display of selected image data is available on the image table.
Image table dialog is configured as follows:
[Edit] . . . . . . . . Deletes, cuts, copies or pastes the image data of the selected
code (refer to pages 323 to 325). It is possible to select two or
more codes and delete them collectively.
[Goto Code] . . Code number can be specified and the cursor moves to the
code. The operation method is same as the "Goto Entry" of a
memory table (refer to 7-1-6 Table Display Operation by Spec-
ifying the Table Entry Number).
[Preview] . . . . . Switches the preview window ON and OFF (refer to page
323).
[Open] . . . . . . . Displays the editing screen (image editor) of the selected
code (P331). When two or more codes are selected, edit
screens of all the selected codes can be opened collectively.
[New] . . . . . . . . Registers the new image code to the image table (refer to
page 325).
Only the registered image codes are listed on the image table.
Press this button when you are going to create new image
data.
Section 8-1