Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 107

Window/Keyboard Screens
Changing the size and the position of pop-up display frame
94
S Input Key-Control
S Input Key-Window/Keyboard
S Input Key-String
S Copy setting
S Cursor Move
S Print Screen
With NT30, NT30C, NT620S, NT620C, and NT625C, keyboard screen can be
used as a standard screen. If it is used as a keyboard screen (called from other
screen), Notify Bit, Cursor Move and Print Screen functions are not available.
NT31, NT31C, NT631, NT631C below "-V1":
S Switch Screen
S Input Key-Control
S Input Key-Window/Keyboard
S Input Key-String
S Copy setting
NT21 and NT31, NT31C, NT631, NT631C "-V1" and above:
S Notify Bit
S Switch Screen
S Input Key-Control
S Input Key-Window/Keyboard
S Input Key-String
S Copy setting
S Window Move
S Print Screen
The procedure for changing the size and the position of a pop-up display frame is
shown below.
(1) Click the mouse on a dotted line of the pop-up display frame.
Green J (handles) appear around the pop-up display frame.
(Arrows in the handle indicates the direction to be resized.)
(2) The frame size can be changed by dragging a handle.
When the mouse cursor is positioned on a handle, the shape of the mouse
cursor changes as shown below according to the handle position. When the
mouse cursor is dragged in this state, the pop-up display frame size chan-
ges in the direction the arrow symbol of the mouse cursor indicates.
Right-left handle Up-down handle
Section 5-4
Apex handle