Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 436

Quick Reference
Item
Operations
To change the PC (PLC)
words/bits in batch
To use the created data in
other applications
To store large data in a
FD
To use I/O comments in
ladder program
To check the flash display on the screen
To check the lamp ON status of lamps/
touch switches on the screen
To specify whether or not to inverse the
screen color or to print screen grid/
dotted line for Screen Image printing
(without changing the screen property).
To display time
To set the time to be displayed
To display the display history of PT
To sound a buzzer at the occurrence of
an error
Operation
[Tools] [Table] [Change Address]
Change the word (address) and bit numbers in a batch.
(1) [Window] [Symbol Manager]
Start the symbol manager and register the created
data.
(2) Open other applications.
(3) [Window] [Symbol Manager]
Start the symbol manager and read the registered
data.
[File] [Import Component]
Start up the second Support Tool.
Perform copy & paste operation of graphic between the
screen data files.
(Between the files of the same PT model setting only)
[File] [Save] or [Save As]
Save data in Memory Map Image File (*mmi) format.
[Tools] [Import I/O comments]
Import I/O comments file of ladder program.
[View] [Simulate Flash]
Elements with a flash attribute flashes.
[View] [Simulate ON/OFF]
Lamp ON status of lamps/touch switches is displayed.
([Simulate Flash] mentioned above can be used at the
same time.)
In Screen Image Attribute of Screen Image printing, set
"Inverse Print," Hide Screen Grid" or "Show Dotted Line
Frame" items as required.
[Objects] [Numeral Display]
Specify numeral memory table entries No. 247 to No. 253
(time data) to display the time.
(1) [Objects] [Data Input]
Set the time to be written to a numeral memory table
entry.
(2) [Objects] [Touch Switch]
Copy the memory table contents where the time is set
to numeral memory table entries No. 254 and No. 255
(time setting).
The display history is displayed by calling the following
screen numbers.
NT30, NT30C, NT600S, NT620S, NT620C, and NT625C:
No. 1997, No. 1998
NT21, NT31, NT31C, NT631, and NT631C: No. 9001, No.
9002
The history is displayed in either the order of occurrence or
order of frequency.
[Tools] [PT Configuration]
Set "On Error" for the buzzer setting.
[Numeral]
[Function: Copy Setting]
Section 10-1
Refer to
7-1-3
6-10
3-3-6
3-3-3
7-7-3
5-1-3
5-1-3
12-1-6
6-6
6-4-1
6-8-6
5-6
5-7
3-3-1
425