Creating New Screen Data (Application) File - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Operation of Screen Data (Application) File

3-3-1 Creating New Screen Data (Application) File

Dialog Box Settings in the PT Configuration
To create new screen data, select [New] in the [File] Menu of the main window.
PT configuration dialog box appears so that users can set information of the ap-
plication environment and type of PT device.
Click the Button after completing the setting at the PT configuration
dialog box. For details of the setting at the PT configuration dialog box, refer to
Dialog Box Settings in the PT Configuration below.
If the PT is set to the NT21, the clock address dialog box will appear next. Refer
to page 53.
The application manager and the data creation screen (1 Standard Screen) are
displayed.
PT screen data is created by arranging objects on this data creation screen.
The application manager is the tool to manage the screen data created by a user.
For operation procedure, refer to Section 4 Application Manager.
Before creating screen data, it is necessary to set the PT configuration and the
Control and Notify Areas that are shared with the PC (PLC).
The operation steps shown below display the PT configuration dialog box.
Section 3-3
45