Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 269

Registering Created Elements (Symbol Manager Operation)
Reference: For an icon, 16 16-dot, 8-color bit map data can be used. Although bit map data
Saving a folder (file)
256
In this case, symbol name "Pasted Symbol x" (x is a serial number) is assigned
for a new symbol.
S Changing the symbol name
To change the symbol name to the one easy to understand, follow the opera-
tion shown below.
(1) Select the symbol name that should be changed. The symbol name is dis-
played in reverse video.
(2) Select [Edit] in the menu bar, then select [Change Label].
The label name change dialog box is displayed.
(3) Set your desired symbol name and click the
S Changing the symbol icon
It is possible to change the icon of the symbol data to a desired one. To change
the icon, follow the procedure shown below.
The data that can be used for an icon is bit map data.
(1) Select the symbol for which the icon should be changed. The symbol name
is displayed in reverse video.
(2) Select [Edit] in the menu bar, then select [Choose Icon].
The data selection dialog box is displayed.
(3) Specify the bit map data that should be used as an icon and click on
.
larger than 16 16 dots can be used, only the 16 16 dots at the upper left area
of such data is used.
After registering the symbol data, save the registered data to a file by the opera-
tion shown below.
Select [File] in the menu bar, then select [Save], [Save As], or [Save All].
If there is a folder that has not been saved, the file name specifying window is
displayed regardless of the save method you chose. If this window opens, speci-
fy the file name to save the folder. Please note that the file name specifying win-
dow does not show the objective folder name, which means that the objective
Section 6-10
Button.