Rep 13.12 Upper Frame Assembly - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Service Parts Disassembly

REP 13.12 Upper Frame Assembly

1. Remove the Tray 1 Feeder Assembly (REP 13.1,

2. Remove the Tray 1 Nudger Position Sensor (REP 13.9,

3. Disconnect the wiring harness connector that is connected to the Tray 1 Feed/

Nudger Motor.

When removing the Tray 1 Feed/ Nudger Motor Assembly in the following

step, be careful not to drop the Gear (29T/19T) and Gear (31T/15T) may drop.

4. Remove 3 screws (silver, 6mm, and Silver, Plastic Tapped, 8mm) that secure

the Tray 1 Feed/ Nudger Motor Assembly to the Tray 1 Feeder Assembly

together with the Ground Wire, and remove the Tray 1 Feed/ Nudger Motor

5. Remove the Gear (29T/19T) and Gear (31T/15T).

Gear(31T/15T)

Gear(29T/19T)

Phaser 7500 Printer Service Manual

MPT (Tray 1)