Reset Security
Reset Security is the second major function within the Security branch of the Top-Level menu. It
erases all contents of the security database table and resets all index locations to Cleared. Two
selections appear under Reset Security: Abort Security Reset and Erase All PassWords. Use Reset
Security if you want to redo the entire security database table.
To reset security, make the following selections:
From the Security branch, press
Select Reset_Security.
To abort this function, select Abort_Sec_Reset. Nothing is erased and the LCD returns to the main
security display.
To reset security, press
Select Erase_All_PassWd.
The entire security database is erased and the Administrative Password defaults to the Reset
Default password value. (The removable page at the end of this chapter contains the Reset Default
password value.)
3920-A2-GH30-40
This function can be used as a last resort if the Administrative
Password is no longer known. This function causes the
Administrative Password to default to the Reset Default
password, and erases the contents of the database table.
Security:
Reset_Security
F1
F2
F3
until Reset_Security appears.
Reset Security
Abort_Sec_Reset
F1
F2
F3
Reset Security
Erase_All_Passwd
F3
F1
F2
until Erase_All_PassWd appears on the LCD.
October 1998
CAUTION
<
>
<
Dial Access Security
12-13