Table of Contents
Advertisement
Using Your Modem
Reload Settings from a User Profile (&Y)
Use the &Y command to select whether the contents of either
User Profile 0 or User Profile 1 are loaded into Active memory
each time the modem turns on or when a reset command (Z) is
issued.
To use the &Y command:
TYPE:
PRESS: Enter
Reset Modem and Load User Profile (Z)
Use the Z command to reset the modem and load the contents
of User Profile 0 or User Profile 1 into the the modem's Active
memory area.
To use the Z command:
TYPE:
PRESS: Enter
The Z command must be the last command in the command
string, because any commands after it will be ignored.
An Overview of File Transfers
and Fax Operation
The purpose of this section is to make you aware of the basic
concepts involved when using your modem to transfer and
receive files and fax messages. For information on how to use
your communication or fax software, you will need to refer to the
documentation provided with your software package.
3-12
Issue 1 November 1994
AT&Y n
where n is 0 for User Profile 0 and 1 for User
Profile 1.
ATZ n
where n is
0 to reset the modem and load the User Profile 0
settings into Active memory.
1 to reset the modem and load the User Profile 1
settings into Active memory.
Advertisement
Table of Contents
