Analog Devices ADRV9001 User Manual page 313

Reference Manual
ADRV9001 EVALUATION SYSTEM
Supports ADRV9002, ADRV9003, and ADRV9004.
►
System
►
Supports TDD, FDD and TDM_FDD.
►
Under TDD:
►
Supports DMR setup.
►
Supports Analog FM setup.
►
Supports LTE setup.
►
Supports Configuration 1, 3, and 4 setup.
►
Custom
►
Custom Extended (allows the "System Clock" to run as slow as 150 MHz).
►
Under FDD:
►
Supports Analog FM setup.
►
Supports LTE setup: This mode allows to configure different channel configurations such as Rx2/Tx1.
►
Supports Configuration 2 setup.
►
Custom
►
Custom Extended (allows the "System Clock" to run as slow as 150 MHz).
►
Under TDM_FDD:
►
Supports Tetra.
►
Supports custom configuration.
►
Custom Extended (allows the "System Clock" to run as slow as 150 MHz).
►
Set SSI to CMOS or LVDS.
►
1 or 4 lane option for CMOS.
►
2 lanes for LVDS.
►
Set SSI Strobe to long or short.
►
Signal type (depends on the selected system and setup).
►
RX supports I/Q and frequency deviation types and bit lengths.
►
TX supports I/Q, I/Q FM/FSK, direct FM/FSK types.
►
Frequency Deviation
►
This option is available only for the TX FM type setups.
►
Enable ORx1 and ORx2 for IQ input.
►
Interface Rate allows to select the rate for the interface. Use this to over or under sample from the sample rate. Provide own PFIR to account
►
for this.
There is a traffic light indicator that checks the selected settings and indicates they are acceptable or not.
analog.com
ADRV9001
Rev. 0 | 313 of 351