Download  Print this page

Sun Ultra 60 Workstation - Xerox DocuPrint 100 Installation Planning Manual

Xerox docuprint 100: install guide
Hide thumbs


The keyboard consists of alphanumeric keys similar to a
typewriter, symbols and special character keys, an extended
character set, and function keys. You can use the keyboard to
make selections, and to enter commands that control functions
such as requesting sample prints, or shutting down the system.
Use the mouse to select, move, or resize windows.
Display monitor
The 18.1-inch LCD monitor allows you to interact with the printer
and to monitor its interaction with the various components.
During a print job, printer error messages may display to notify
you of any unexpected conditions.
NOTE: For information on channel-attached systems, refer to
the chapter, "IPDS printing environment".
NOTE: Printer controller hardware configurations are subject to

Sun Ultra 60 workstation

A PCIM2 card for the Sun Ultra 60 is installed in the processor.
The printer cable is connected to the processor. In addition, the
processor contains the connectivity boards for Ethernet and
optional Token Ring. The disk stores the operating system, the
system software, and any buffered pages.
For channel connection to a host for IPDS printing, the system
may use an HCU.
An external 4 mm tape drive is available and recommended for
backing up site files. A typical color calibration file is 1.5 MB.
Installation Planning Guide


Table of Contents

  Related Manuals for Xerox DocuPrint 100