Download  Print this page

Xerox DocuPrint 100 Installation Planning Manual page 177

Xerox docuprint 100: install guide
Hide thumbs

Advertisement

Installation Planning Guide
Use Print Server for Novell Netware -- <Y>
Name of Novell Print Server -- PGazette
IPX Internal Network Number [000000##] (assigned by
network administrator)
IPX number of Connected LAN [000000##] (assigned by
network administrator)
Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
3. After installation, change from PSERVER to RPRINTER as
follows:
a. Sign on to privilege as an administrator.
b. Enter Configure to specify the printer configuration.
c. Select Option 3, enter <N> to the Review All
Information question, and enter Novell to review Novell
information.
d. Enter the following information:
Remote Printer for Novell Netware -- <N>
Print Server for Novell Netware -- <N>
Name of Novell Print Server -- PGazette
IPX Internal Network Number [000000##] (assigned
by network administrator)
IPX number of Connected LAN [000000##] (assigned
by network administrator)
Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
e. Save all of the options.
4. Enter Start All.
5. Reboot the NPS/IPS.
6. Provide all of the required installation parameters identified in
the checklist provided in chapter 2 of this guide to your
service representative.
In the following illustration, the queue, virtual printer, and
specified form are configured with the same name. The user
sends a print job that specifies a print queue named Gazette
through the Ethernet or Token Ring port to the Gazette queue
that is served by the print server. This job is assigned to the
Gazette virtual printer on NPS/IPS.
D-9

Advertisement

Table of Contents
loading

  Related Manuals for Xerox DocuPrint 100