Download  Print this page

Cable Locations - Xerox DocuPrint 100 Installation Planning Manual

Xerox docuprint 100: install guide
Hide thumbs


System connections

Cable locations

To run the cables beneath the flooring effectively, it is necessary
to know where the cables enter and exit the printer. The following
diagrams show those locations (marked with an X).
All power cords attach to the back of the printer. Listed below are
the distances of the printer power cord attachments from the left
end of the printer as you face it.
Figure 7-1. 96/4635/180 cable enter/exit location (top view)
180 power cord attachments: distance from end of printer:
– Cord 1: 36 inches / 914 mm (with ELCI)
– Cord 2: 23 inches / 584 mm (with ELCI)
96 and 4635: distance from end of printer—14 inches / 356
Installation Planning Guide


Table of Contents

  Related Manuals for Xerox DocuPrint 100