Download  Print this page

Xerox DocuPrint 100 Installation Planning Manual page 214

Xerox docuprint 100: install guide
Hide thumbs

Advertisement

Defining the printer to the host: TCP/IP attachment
Table F-16. Create Device Description (Printer) screen for
CREATE DEVICE DESC (PRINTER) (CRTDEVPRT)
Type choices, press Enter.
DEVICE DESCRIPTION.........
DEVICE CLASS...............
DEVICE TYPE................
DEVICE MODEL...............
LAN ATTACHMENT.............
ADVANCED FUNCTION PRINTING..
PORT NUMBER................
ONLINE AT IPL..............
FONT:
IDENTIFIER...............
POINT SIZE...............
FORM FEED..................
SEPARATOR DRAWER...........
SEPARATOR PROGRAM..........
LIBRARY..................
PRINTER ERROR MESSAGE......
MESSAGE QUEUE..............
LIBRARY..................
F-24
3. Create the printer device description – AS/400
Follow these steps to create the device description for the printer.
1. At the AS/400, press <F4> to prompt the CRTDEVPRT
command.
2. Key in the parameter values as indicated in the appropriate
figure below.
Table F-16 shows printer description parameters for OS/
400 with V3R7 installed.
Table F-17 shows parameters for OS/400 with V3R2
installed.
For parameters with * beside them, refer to the configuration
worksheet, earlier in this section.
OS/400 with V3R7 installed
> XEROXIPS
*
> *LAN
(New to V3R7)
> *IPDS
> 0
*IP
(New to V3R7)
*YES
> 5001
*
*YES
> 11
*NONE
*AUTOCUT
*FILE
*NONE
*INQ
QSYSOPR
*LIBL
Installation Planning Guide

Advertisement

Table of Contents
loading

  Related Manuals for Xerox DocuPrint 100