Xerox DocuPrint 100 Installation Planning Manual page 138

Supplies
Feed direction for
some standard
paper sizes
A-6
NOTE: The 96/4635/180 printer can support 14 by 17-inch / 356
by 432 mm, 20 pound or 80 gsm paper stock in 3-pitch mode.
However, printing performance is not guaranteed for all types of
paper of this size. Heavy (110-pound / 200 gsm) and light (16-
pound / 60 gsm) large papers can cause jams throughout the
system and are not recommended.
The following figure illustrates the maximum and minimum paper
sizes supported in 3-pitch mode.
Figure A-2. 3-pitch mode paper sizes
1. Maximum paper size for 3 pitch mode
2. Minimum paper size for 3 pitch mode
3. Travel direction of sheets out of paper tray
Currently, 14 inches / 356 mm is the maximum paper length
supported for long edge feeding (5 to 8 pitch mode). Any papers
with long edges greater than this (such as 11 by 17 inch / 279 by
432 mm paper) must be loaded for short edge feeding (3 or 4
pitch mode).
The following figures illustrate how some of the supported
standard paper sizes, in various pitch modes, feed through the
printer.
European papers:
The following diagrams show how A4 and A3 paper sizes feed
through the printer.
Installation Planning Guide