Ordering Supplies - Xerox DocuPrint 100 Installation Planning Manual

Ordering supplies

Installation Planning Guide
To avoid unnecessary downtime, always have an adequate
amount of the necessary supplies. To do this, you need to
establish a procedure for checking and ordering supplies. A
supplies checklist is provided at the end of this chapter to help
you with this task. It lists the supplies needed for the printer and
contains a column for you to enter the date when you want to
place the order and a column to record the date of the actual
order. The consumable supplies table, above, contains a list of
Xerox supplies available for the printer.
It is important that you check your supplies regularly and order
before you run out. Plan on approximately five working days for
delivery after placing the order. You can make arrangements to
receive them sooner in emergency situations.
Your Xerox sales representative can help you submit the initial
order of supplies needed for installation. These items include
paper, dry ink, MICR dry ink, fuser agent, developer, and MICR
developer.
Once your printer volume is established, planning ahead and
buying Xerox supplies in quantity can save you money. Your
Xerox supply specialists can help you. There are two centers
available to assist you:
• To order Xerox paper, transparencies, labels, dry ink, MICR
dry ink, developer, MICR developer, fuser agent, cartridge
tapes, and diskettes, call the Xerox Supply Center at 1-800-
822-2200, weekdays between 7:30 a.m. and 6:00 p.m.,
Pacific time.
If you prefer, you may mail orders to the following address:
Xerox Corporation
P. O. Box 25075
Santa Ana, CA 92799-5075
• To order cleaning supplies, call the Xerox Customer Parts
and Product Support Center at 1-800-828-5881, weekdays
between 5:30 a.m. and 5:00 p.m., Pacific time, (U.S. only).
You may also mail cleaning supply orders to the following
address:
A-23