Xerox DocuPrint 100 Installation Planning Manual page 111

Turning radius for
unseparated
printer
components
Turning radii for
feeder/stacker
modules
Installation Planning Guide
Table 6-8. Turning radius for printer (separated and upended on dolly)
Passage or doorway A width
34 inches / 86.4 cm
36 inches / 91.4 cm
38 inches / 96.5 cm
40 inches / 101.6 cm
42 inches / 106.7 cm
The following table lists the turning requirements for the printer
when attached to the paper handling module (not separated).
Table 6-9. Turning radius for printer (not separated)
Passage or doorway A width
29 inches / 73.6 cm
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
34 inches / 86.4 cm
36 inches / 91.4 cm
38 inches / 96.5 cm
40 inches / 1,01.6 cm
42 inches / 1,06.7 cm
The following table lists the turning requirements for the inverter
feeder/stacker module.
Table 6-10. Turning radius for inverter feeder/stacker module
Passage or doorway A width
29 inches / 73.7 cm
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
33 inches / 83.8 cm
34 inches / 86.4 cm
35 inches / 88.9 cm
36 inches / 91.4 cm
37 inches / 94 cm
Minimum passage B width
37.5 inches / 95.3 cm
35 inches / 88.9 cm
33.5 inches / 85.1 cm
32 inches / 81.3 cm
31 inches / 78.7 cm
Minimum passage B width
83 inches / 210.8 cm
76 inches / 193 cm
73 inches / 185.4 cm
70.5 inches / 179.1 cm
66.5 inches / 169 cm
63.5 inches / 161.3 cm
61.5 inches / 156.2 cm
58 inches / 147.3 cm
55 inches / 139.7 cm
Minimum passage B width
43 inches / 109.2 cm
41 inches / 104.1 cm
40 inches / 101.6 cm
38 inches / 96.5 cm
37 inches / 94 cm
36 inches / 91.4 cm
35 inches / 88.9 cm
34 inches / 86.4 cm
33 inches / 83.8 cm
6-27