Download  Print this page

Sun Ultra 60 Workstation - Xerox DocuPrint 100 User Manual

System overview guide
Hide thumbs

Advertisement

Keyboard
Mouse
Display monitor

Sun Ultra 60 workstation

System Overview Guide
6. Twisted-pair Ethernet (TPE) connector
7. IEEE 1394 connectors
8. Fibre Channel-Arbitrated Loop (FC-AL) connector
9. Audio module headphones, line-in, line-out, and
microphone connectors
10. Graphics card / video connector (frame buffer 0)
11. PCI card slot 4
12. Graphics card / video connector (frame buffer not used)
13. PCI card slots 3 and 2
14. Power connector
15. PCI card slot 1
The keyboard consists of alphanumeric keys similar to a
typewriter, symbols and special character keys, an extended
character set, and function keys. You can use the keyboard to
make selections, and to enter commands that control functions
such as requesting sample prints, or shutting down the system.
Use the mouse to select, move, or resize the windows.
The 18.1-inch LCD monitor allows you to interact with the printer
and to monitor its interaction with the various components.
During a print job, printer error messages may display to notify
you of any unexpected conditions.
NOTE: For information on channel-attached systems, refer to
the chapter, "IPDS printing environment".
NOTE: Printer controller hardware configurations are subject to
upgrade.
A PCIM2 card for the Sun Ultra 60 is installed in the processor.
The printer cable is connected to the processor. In addition, the
processor contains the connectivity boards for Ethernet and
optional Token Ring. The disk stores the operating system, the
system software, and any buffered pages.
Printer controller overview
2-5

Advertisement

Table of Contents
loading

  Related Manuals for Xerox DocuPrint 100