Installation Planning Guide
Preparing for installation
This chapter assists you in preparing for the installation of your
Xerox DocuPrint 96/4635/180 NPS/IPS and 96/4635/180 MICR
Preparing for installation is a responsibility shared by personnel
at your site and Xerox. Your service representatives are available
to discuss installation issues and to assist you in completing the
site installation tasks.
Before installation, you must select and prepare an appropriate
location for the printing system and order supplies. This chapter
helps you accomplish these tasks by providing the following
A summary of your responsibilities and those of your Xerox
Connectivity requirements for setting up the NPS/IPS to
receive data from the IBM host
A checklist of installation planning activities.
For information on controller power and space requirements,
refer to the "Controller specifications and requirements" chapter
of this guide. For facts about printer power and space
requirements, refer to the "Printer specifications and
requirements" chapter of this guide.
This section describes your site responsibilities and the
responsibilities of your service representatives. Included are
some joint responsibilities.
This section lists the responsibilities of the service
representatives and system analysts before, during, and after