Download  Print this page

Xerox DocuPrint 100 Installation Planning Manual page 72

Xerox docuprint 100: install guide
Hide thumbs

Advertisement

Preparing for installation
Network Information
Hostname
IP address for primary net device
IP netmask for primary net device
IP address for secondary net device #1 (if applicable)
IP netmask for secondary net device #1 (if applicable)
IP address for secondary net device #2 (if applicable)
IP netmask for secondary net device #2 (if applicable)
IP address for secondary net device #3 (if applicable)
IP netmask for secondary net device #3 (if applicable)
Primary network device
Default router
Secondary network devices (if applicable)
Superuser password
Accounting information
Xerox client software
lpr and lpd
UNIX command tool
Retry count
4-14
Choose a framing type used by the file server that communicates
with DocuPrint NPS/IPS. If you are using print server or remote
printer, and have the DocuPrint NPS/IPS communicate with a
different machine for each, then choose a framing type that is
used by both of the machines.
If you are installing a new Novell network using Ethernet, it is
recommended that you choose the ETHERNET__II framing type
for the file server and the DocuPrint NPS/IPS. If you are using
Token Ring and the Novell server has both TOKENRING and
TOKEN RING_SNAP enabled, use TOKENRING on the
DocuPrint NPS/IPS. For FDDI networks running Novell, it is
recommended that you choose the FDDI framing type.
Table 4-2. Network preinstallation checklist
Information you supply
Installation Planning Guide

Advertisement

Table of Contents
loading

  Related Manuals for Xerox DocuPrint 100