Download  Print this page

Xerox DocuPrint 100 Installation Planning Manual page 199

Xerox docuprint 100: install guide
Hide thumbs

Advertisement

Table F-5. PSF/MVS PRINTDEV statement parameters
Item
description
Default
APPLID
None
BUFNO
FAILURE
FDEFDD
None
FONTDD
None
Installation Planning Guide
4. Configure the printer in PSF/MVS
Follow these steps to configure the printer in PSF:
1. Locate the PSF startup procedure in the JES3 or JES2
startup JCL procedure. This is normally kept in
SYS1.PROCLIB, although your system may use a different
library.
The libraries specified by the //PROC00 DD statement
normally contains startup procedures for PSF subsystems.
The name of the procedure is specified in the initialization
dataset (FSS statement PROC parameter in JES2; the
FSSDEF statement PNAME parameter in JES3. See the
appropriate section in this appendix for clarification).
2. Add a PRINTDEV statement to define the printer in PSF.
(See the example below for the general format or the Print
Services Facility for OS/390 Customization for more
information.)
The table below contains descriptions of the PSF parameters
which need to be set for the printer.
Range of
Source of
acceptable
value
values
VTAM APPL
1 to 8-character
statement
alphanumeric
string
N/A
5 to 100
Installation
WCONNECT or
preferences
STOP
Installation
1 to 8-character
preferences
alphanumeric
string
Installation
1 to 8-character
preferences
alphanumeric
string
Comments
Not applicable for TCP/
IP-attached printer
Not applicable for TCP/
IP-attached printer
If printer is used by other
hosts, WCONNECT
causes PSF to
continuously retry to
establish connection with
printer.
Name of the form
definition library DD
statement
Name of font library DD
statement. Fonts in this
library must match
resolution the printer is
using.
Your
value
F-9

Advertisement

Table of Contents
loading

  Related Manuals for Xerox DocuPrint 100