Introduction
Conventions
xviii
•
Chapter 5, "Controller specifications and requirements,"
describes power, environmental, and space requirements for
the system controller.
•
Chapter 6, "Printer specifications and requirements,"
describes power, environmental, and space requirements for
the printer. Space planning guidelines and diagrams are
provided to help you set up the work area.
•
Chapter 7, "System connections," provides cable
requirements for your printing system.
•
Chapter 8, "Installation," describes the activities that occur
during installation. It also describes ongoing maintenance
activities.
•
Appendix A, "Supplies," describes how to select, store, and
use supplies for the DocuPrint printing system. It also
provides a list of consumable supplies you can order.
•
Appendix B, "Xerox support services," explains how to utilize
available Xerox support services.
•
Appendix C, "Related publications," lists other Xerox
documents that are part of this publication set.
•
Appendix D, "DocuPrint NPS/IPS on a Novell network,"
describes some of the considerations to make before the
installation of DocuPrint on a Novell network.
•
Appendix E, "Defining the channel-attached printer to the
host," provides explanations and sample printer parameters
for defining your channel-attached printer to your host.
•
Appendix F, "Defining the printer to the host: TCP/IP
attachment," provides instructions, prerequisites, and sample
printer parameters for defining your TCP/IP-attached printer
to your host.
A glossary and index are provided at the back of the guide.
This guide uses the following conventions:
•
All caps and angle brackets: Within procedures, the names
of keys are shown in all caps within angle brackets (for
example, press <ENTER>).
•
Angle brackets: Variable information, or the position of a
specified argument in the command syntax, appears in angle
brackets (for example, List Fonts <Pattern>).
Installation Planning Guide
Need help?
Do you have a question about the DocuPrint 100 and is the answer not in the manual?