Table of Contents
Advertisement
2. Disassembling and Assembling
Procedure
1) Removal and Inspection of
Drive Shaft Housing
1.
Tilt up drive shaft housing.
Remove reverse lock arm 1.
2.
Remove thrust rod 2.
3.
Remove wing nut 3 for co-pilot.
4.
Loosen four swivel bracket (B) bolts 4.
Hold drive shaft housing to prevent it from
dropping.
4st 4/5/6 2020
1 1
2 2
3 3
4 4
7
7-11
Advertisement
Table of Contents
