Removing Drive Shaft Housing - TOHATSU MFS25 Service Manual

Bracket

4) Removing Drive Shaft Housing

1. Place draining container below drain hole, and remove drain
bolt to drain gear oil. "Refer to Chapter 3."
Remove bolt 1 and remove mount cover 2.
2.
Remove lower mount nuts 3 and bolts 4.
3.
Turn down lock plate tab 8, remove upper mount nut 5,
4.
and then, remove drive shaft housing ass'y 7.
When remove or installing drive shaft housing
with power unit installed on the outboard motor,
perform the work with outboard motor hung to
lighten load applied to upper mount bolt.
7-16
7
6
4
3
1
2
1342 1342
1342
8
25/30 2006