Table of Contents
Advertisement
CHAPTER 7 INTERRUPTION/EXCEPTION PROCESSING FUNCTION
7.4.2 Restore
Recovery from software exception processing is carried out by the RETI instruction.
By executing the RETI instruction, the CPU carries out the following processing and shifts control to the restored
PC's address.
<1> Loads the restored PC and PSW from EIPC and EIPSW because the EP bit of the PSW is 1.
<2> Transfers control to the address of the restored PC and PSW.
Figure 7-9 illustrates the processing of the RETI instruction.
1
Caution When the PSW.EP bit and the PSW.NP bit are changed by the LDSR instruction during the
software exception processing, in order to restore the PC and PSW correctly during
recovery by the RETI instruction, it is necessary to set PSW.EP back to 1 using the LDSR
instruction immediately before the RETI instruction.
Remark The solid line shows the CPU processing flow.
Figure 7-9. RETI Instruction Processing
RETI instruction
PSW.EP
0
PSW.NP
0
PC
EIPC
PSW
EIPSW
Original processing restored
User's Manual U14359EJ4V0UM
1
PC
FEPC
PSW
FEPSW
289
Advertisement
Table of Contents
