2. INSTALLATION
2.1 REAR PANEL
4015
!
4025
!
INSTALLATION
Figure 2-1: Rear Panel
The following sections describe the purpose of the rear panel connectors of
the 4025TR. Figure 2-5 to Figure 2-8 give sample connection diagrams for
various common configurations. Sections 2.7 to 2.12 describe the specific
generator, reader, character inserter, and telecine signals that should be
connected to the 4025TR.
Evertz 4015 and 4025 users who are upgrading to 4025TR units will be
familiar with most of the connections. Most of the connections are the same
as for the model 4015 or 4025. Pay particular attention to alerts identified
with the symbol shown at the left.
2.1.1 Generator Connectors
Figure 2-2: Generator Rear Panel Connectors
LTC OUT: A Male XLR connector for output of SMPTE/EBU linear time
code generator.
GEN VIDEO IN: A BNC loop for input of program video onto which vertical
interval time code will be inserted. This signal is required for
proper gen-locking of the Model 4025TR VITC Generator.
VITC OUT: Two BNC outputs of program video with vertical interval time
code inserted.
Model 4025TR Film Footage Encoder Manual
Page 2-1