Selecting The Line Numbers To Record Vitc On - evertz 4025TR Instruction Manual

!
VITC1 LINES
GEN VITC1 LINES
LINE1-10 LINE2-20
VITC2 LINES
GEN VITC2 LINES
LINE1-10 LINE2-20
OPERATION
Select CINE VRDR 3 LINE to slave the video time to the
telecine's biphase, and the audio time to the VITC reader. This
mode would typically be used when the audio code is being fed
to the 4025TR through an LTC to VITC translator such as the
S621D-TLR.
time to the telecine's biphase, and the audio time to the LTC
reader.
slaved to the telecine biphase as it allows readers to
automatically detect the film format and transfer rate of the
encoded information.
Select LRDR VRDR 3 LINE to slave the video time to the LTC
Reader, and the audio time to the VITC reader. This mode
would typically be used when the audio code is being fed to the
4025TR through an LTC to VITC translator such as the S621D-
TLR. Select VRDR LRDR 3 LINE to slave the video time to the
VITC reader, and the audio time to the LTC reader. This is the
preferred mode when the Video time is slaved to the LTC reader
as it allows readers to automatically detect the film format and
transfer rate of the encoded information.
When you are using one of the 3-line modes the operation of
some of the other menu items changes as follows
1. The VITC LINES are set using the VITC1 LINES menu item.
2. The EDGE STYLE and EDGE FORMAT menu items are
When using one of the 3-Line VITC formats a special reader such as the
Afterburner is required to decode & display the film & production data.
3.3.2

Selecting the Line Numbers to Record VITC On

VITC1 LINES Is used to set the lines that the primary VITC will be
recorded on. Use the " & # keys to select the first or second
line. Use the $ & % keys to select the line number.
When the using one of the 3-line VITC modes of encoding, GEN
VITC1 LINES sets the line numbers for each block of 3 lines.
VITC2 LINES Is used to set the lines that the secondary VITC (containing
full KeyKode information) will be recorded on. The secondary
Model 4025TR Film Footage Encoder Manual
Select CINE LRDR 3 LINE to slave the video
This is the preferred mode when the Video time is
You can only select the lines in block of 3 lines as shown on
the menu item. The VITC2 LINES menu item is not used.
See section 3.9.7 for further information.
ignored as the 3-line VITC standard defines the encoding
method. See section 3.4.5, 3.10.7 and 3.10.8 for further
information.
Page 3-16