Character Generator Controls; Selecting And Positioning The Individual Character Windows; Positioning The Overall Character Display - evertz 4025TR Instruction Manual

3.12 CHARACTER GENERATOR CONTROLS

!
OPERATION
The four arrow keys $,%,", and#, and the CHAR GEN ON / OFF and
MODE keys, control the display of information in the character generator.
The Video time, film key number (KeyKode number), Audio time and Ink
number data may be displayed in separate positionable windows. Each
window may be positioned anywhere on the raster, or turned off. One of
three character sizes and four character styles apply to all the windows,
and are selectable using the CONFIG drop down menu of the setup menu.
Nine additional windows for production data, Absolute Frames and user
text may be enabled using the Windows tab of the configuration screen in
the KeyLog TRACKER™ software. These additional windows can only be
controlled from the TRACKER software.

3.12.1 Selecting and Positioning the Individual Character Windows

Press the CHAR GEN MODE key to enable the VCG window select mode.
All four windows will appear on the character screen, with the window for
the generator 1 Time highlighted. Use the $, %, ", # keys to position
the generator time window on the screen. Press the CHAR GEN ON / OFF
key to turn the window on or off. Press the MODE key again to select the
next window. Use the $, %, ", # keys and the ON / OFF key to move
the window to the desired location and turn it on or off.
remaining windows using the MODE key until all four windows are where
you want them on the screen. Press the MODE key one more time or
press the CLR key to exit the VCG window select mode.
The 4025TR can position the characters in the vertical interval of the picture,
causing them to 'disappear' or to overwrite the VITC. Caution should be used
when placing the characters in the vertical interval.

3.12.2 Positioning the Overall Character Display

In the normal display mode, when none of the windows are highlighted, the
four arrow keys ($, %, ", #) move all the displayed windows by the
same relative amount.
KeyKode windows both down by one line press the % key. To move only
the Time window down, leaving the KeyKode window in the same place,
press CHAR GEN MODE key and then press the % key. Press the CLR
key to return to the normal display mode.
Model 4025TR Film Footage Encoder Manual
For example, to move the generator time and
Select the
Page 3-61