Table of Contents
Advertisement
2.
INSTALLATION
The 7700SID(-AM) modules comes with a companion rear plate that has 3 BNC connectors and one high
density female DB-15. For information on mounting the rear plate and inserting the module into the frame
see the 7700FR chapter section 3.
7700SID and 7700SID-AM cards can be interchanged in the 7700 frame but there will not be any audio
output from 7700SID cards.
2.1.
VIDEO IN AND OUT
Connect a source of component 525 or 625 270 Mb/s video to the top BNC labeled SDI INPUT.
Processed digital component video with text and audio bar graphs is available on the SDI OUTPUT BNC
while processed composite analog video is available on the COMPOSITE OUTPUT BNC. If the card is not
present or the power is off, there will be nothing on the outputs.
Figure 2: 7700SID and 7700SID-AM Rear Panels
Revision 0.3
7700SID(-AM) Source Identification Decoder
7700 MultiFrame Manual
7700SID(-AM)-3
Advertisement
Table of Contents
