1. Manuals
  2. Brands
  3. evertz Manuals
  4. Media Converter
  5. 5782DEC
  6. User manual

evertz 5782DEC User Manual

Professional h.264 and mpeg-2 decoder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Professional H.264 and MPEG-2 Decoder
© Copyright 2016
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone:
+1 905-335-3700
Sales:
sales@evertz.com
Tech Support: service@evertz.com
Web Page:
http://www.evertz.com
Version 1.0, December 2016
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 5782DEC series products. Evertz Microsystems expressly
prohibits the use of this manual for any purpose other than the operation of the 5782DEC series products. Due to
on going research and development, features and specifications in this manual are subject to change without
notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of
Evertz Microsystems Ltd.
Microsystems.
5782DEC
User Manual
Fax: +1 905-335-3573
Fax: +1 905-335-7571
Copies of this manual can be ordered from your Evertz dealer or from Evertz

Advertisement

Table of Contents
loading

Related Manuals for evertz 5782DEC

Summary of Contents for evertz 5782DEC

  • Page 1 5782DEC series products. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the 5782DEC series products. Due to on going research and development, features and specifications in this manual are subject to change without notice.
  • Page 2 This page left intentionally blank...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “Dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
  • Page 4 WARNING Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface...
  • Page 5 Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
  • Page 6 5782DEC Professional H.264 and MPEG-2 Decoder This page left intentionally blank Page ii Revision 1.0...

  • Page 7: Table Of Contents

    OVERVIEW ........................... 1 GETTING STARTED ........................3 2.1. CONNECTIONS ........................3 2.2. HARDWARE INSTALLATION ....................3 2.2.1. Network Settings for VLPRO – 5782DEC ..............4 TECHNICAL SPECIFICATIONS ....................7 3.1. VIDEO SPECIFICATIONS ....................7 3.2. AUDIO SPECIFICATIONS....................7 3.3. ANCILLIARY SPECIFICATIONS ..................7 3.4.
  • Page 8 5782DEC Professional H.264 and MPEG-2 Decoder 5.5. DECODER AUDIO MONITOR .................... 36 5.6. DECODER OUTPUT CONTROL ..................37 5.7. DECODER ANC DATA CONTROL ..................38 5.8. DECODER ANC MONITOR ....................40 5.9. SFP-ASI TRANSMIT CONTROL ..................41 5.10. INBAND CONTROL ......................42 5.11.
  • Page 9 Figures Figure 1-1: 5782DEC Block Diagram ....................... 2 Figure 2-1: 5782DEC-H264HD-IPASI Rear Plate .................... 3 Figure 2-2: 5782DEC COM Login and Main Menu ................... 4 Figure 2-3: 5782DEC COM Network Setup ...................... 5 Figure 4-1: VistaLINK – System Tab ....................... 9 ®...
  • Page 10 5782DEC Professional H.264 and MPEG-2 Decoder This page left intentionally blank Page vi Revision 1.0...

  • Page 11: Overview

    The 5782DEC is perfect for monitoring applications or decoding for downstream baseband video and audio processing. The 5782DEC can reconstruct in the most flexible way all VANC & HANC data in the baseband outputs. The 5782DEC can be integrated in the Evertz 7881IRD-H264HD-LB platform to create a highly flexible demodulating and decoding DVB-S/S2 satellite receiver.

  • Page 12: Figure 1-1: 5782Dec Block Diagram

    5782DEC Professional H.264 and MPEG-2 Decoder Figure 1-1: 5782DEC Block Diagram Page - 2 OVERVIEW Revision 1.0...

  • Page 13: Getting Started

    ESD strap be worn. Locate on a frame chassis a vacant slot. Unpack the 5782DEC and separate the rear panel from the main card. Locate the slot on the rear of the rack and remove the blanking panel. Insert the rear panel into the back of the chassis and secure using the two screws provided.

  • Page 14: Network Settings For Vlpro - 5782Dec

    Professional H.264 and MPEG-2 Decoder 2.2.1. Network Settings for VLPRO – 5782DEC 1. Connect the Evertz serial upgrade cable (ribbon cable) to the 2x3 header at the front edge of the 5782DEC. 2. Start a terminal program and configure the port settings.

  • Page 15: Figure 2-3: 5782Dec Com Network Setup

    Set the desired network addresses per your requirement. After entering all settings choose Exit two times to get back to the login prompt. The card must be rebooted for all the network settings to take effect. Figure 2-3: 5782DEC COM Network Setup GETTING STARTED Page - 5...
  • Page 16 5782DEC Professional H.264 and MPEG-2 Decoder This page left intentionally blank Page - 6 GETTING STARTED Revision 1.0...

  • Page 17: Technical Specifications

    5782DEC Professional H.264 and MPEG-2 Decoder TECHNICAL SPECIFICATIONS 3.1. VIDEO SPECIFICATIONS • Number of Inputs/Outputs: BNC: 2x ASI Inputs 2x 3G/HD/SD/ASI Outputs 2x GbE Data Ports (Optional SFP) • Standard: SMPTE 425M/292M/259M 3Gb/s, 1.485Gb/s, 270Mb/s ASI per DVB TR 101 891 (Max 213Mb/s) Max Program BR –...

  • Page 18: Configuration & Mgmt

    5782DEC Professional H.264 and MPEG-2 Decoder 3.5. CONFIGURATION & MGMT • Web Server: Integrated HTTP with full control • SNMP: VistaLINK remote control and monitoring via Frame Controller 3.6. ELECTRICAL • Input Voltage: Auto ranging 100 – 240VAC • Power: <48W...

  • Page 19: Vistalink ® Pro Interface

    JAR file to the server, and both the client and server applications have been restarted. There are two methods that can be used to communicate with the 5782DEC and VistaLINK PRO. ®...
  • Page 20 Syslog is a valuable tool for debugging the device operation. It is essentially serial readouts over IP, sent to a dedicated server. If issues are present, Evertz can help install and setup a syslog server for constant monitoring of the device activity.

  • Page 21: Product Features

    Professional H.264 and MPEG-2 Decoder 4.2. PRODUCT FEATURES The 5782DEC has the ability to enable features by adding/updating applicable licenses. Please contact Evertz Microsystems Ltd for any additional license generation along with Product Serial Number and Product MAC address. Figure 4-2: VistaLINK –...

  • Page 22: Input Control

    5782DEC Professional H.264 and MPEG-2 Decoder DBISS Product Feature: With the DBISS license key, the decoder will provide BISS 1 and BISS E descrambling capability. SCTE104 Product Feature: With the SCTE104 license key, the decoder will support SCTE35 to SCTE104 translation.
  • Page 23 5782DEC Professional H.264 and MPEG-2 Decoder Input IP Address: This parameter allows the user to set the IP Address of the input data. Destination UDP Port Number: This parameter allows user to select the destination UDP port number for the input data stream.
  • Page 24 3080UEP-H264HD-IPASI control IP Port, the data is then captured and embedded into the encoder output on a Private Data PID. The 5782DEC can extract data from this Private Data PID and output it as a UDP packet on its own control port.

  • Page 25: Input Control Tab Continued

    5782DEC Professional H.264 and MPEG-2 Decoder Figure 4-4: VistaLINK – Input Control Tab continued ® Switch Over Control User Redundancy Mode: This control allows the user to enable or disable redundancy mode on input. Active Source: This monitor displays the active input.

  • Page 26: Decoder Monitor

    5782DEC Professional H.264 and MPEG-2 Decoder stereo downmix is required. By default full decode of Dolby AC3 is supported. However, the license key for Dolby Decode must be purchased for full decode of Dolby E. 4.4. DECODER MONITOR Figure 4-5: VistaLINK –...
  • Page 27 5782DEC Professional H.264 and MPEG-2 Decoder Video PID: This parameter displays the Video Packet ID (PID). The video PID allows the decoder to sort the video packets in the transport stream to organize them for output. Video Bitrate: This parameter displays the video bitrate of the associated video stream.

  • Page 28: Decoder Audio Monitor

    – Decoder Audio Monitor Tab ® The 5782DEC can decode up to 8 audio PIDs, and for each of the audio PIDs the following information is monitored and displayed. Audio PID Number: This parameter displays the Audio Packet ID (PID) number for the audio stream that is being decoded.

  • Page 29: Output Control

    5782DEC Professional H.264 and MPEG-2 Decoder 4.6. OUTPUT CONTROL Figure 4-7: VistaLINK – Output Control Tab ® Video Output Control Output Video Standard: This control allows the user to select the output video standard. Loss of Video Output: This parameter allows the user to set the response of the decoder when the video output is lost.

  • Page 30: Anc Data Control

    5782DEC Professional H.264 and MPEG-2 Decoder 4.7. ANC DATA CONTROL Figure 4-8: VistaLINK – ANC Data Control Tab ® CC Controls CC Selection: This parameter allows the user to select if Closed Caption 608/708/Divicom should be embedded on the decoded output. In Auto mode, it will automatically pick the correct CC type in the decoded transport stream.

  • Page 31: Anc Monitor

    5782DEC Professional H.264 and MPEG-2 Decoder WST/WSS/OP47 Controls OP47 Insert Line: This parameter allows the user to select the OP47 insertion lines for ANC services. OP47 Embed Enable: This parameter allows the user to enable the embedding of OP47 in the output.

  • Page 32: Input Faults

    5782DEC Professional H.264 and MPEG-2 Decoder ANC Monitor CC Type: This parameter displays the type of encoded closed captions present in the Transport Stream. WST Present: This parameter displays the status of the WST. WST Present: This parameter displays the status of the WSS.

  • Page 33: Sfp-Asi Transmit

    5782DEC Professional H.264 and MPEG-2 Decoder Input Bit Error: Input bit error detection. The alarm is triggered when enabled and there is an error in the input bits. SCTE35 Data Present: SCTE35 Data present monitoring. The alarm is triggered when enabled and the SCTE35 data is no longer present.

  • Page 34: Inband Control

    5782DEC Professional H.264 and MPEG-2 Decoder Remove NULL Packets: This parameter allows the user to enable the removal of NULL packets in the SFP transmit stream. Packet Rate Control: This parameter allows the user to enable the packet rate control in the SFP transmit stream.
  • Page 35 5782DEC Professional H.264 and MPEG-2 Decoder Current Image Number: This parameter returns the image number that is currently running. Time Zone Offset: This parameter allows the user to set the time zone offset, for GMT, to apply to the external NTP and local clock time sources.
  • Page 36 5782DEC Professional H.264 and MPEG-2 Decoder This page left intentionally blank Page - 26 VLPRO INTERFACE Revision 1.0...

  • Page 37: Web Interface

    Professional H.264 and MPEG-2 Decoder WEB INTERFACE After the 5782DEC has been installed and the 570FC has been configured with the required network addresses for the control port, the 5782DEC can be completely configured using the web interface via the 570FC WebEASY UI. To do this, simply type in the IP address of the 570FCcontrol port in a web browser (Chrome or Firefox are preferred).

  • Page 38: System

    Figure 5-2: WebEASY – System Tab ® Control Port: Currently unused on 5782DEC platform. Data Port Control 1 & 2 IP Address: This control allows the user to set the IP address on the Data Port. This control will also display the currently set IP address.

  • Page 39: Figure 5-3: Webeasy - System Tab Continued

    Syslog is a valuable tool for debugging the device operation. It is essentially serial readouts over IP, sent to a dedicated server. If issues are present, Evertz can help install and setup a syslog server for constant monitoring of the device activity.

  • Page 40: Product Features

    Product License Product License File: This parameter allows the user to search for their product license file. Product Serial Number: This parameter displays the card serial number. This is required by Evertz when generating or updating license files on the 5782DEC.

  • Page 41: Decoder Input Control

    5782DEC Professional H.264 and MPEG-2 Decoder 5.3. DECODER INPUT CONTROL Figure 5-5: WebEASY – Decoder Input Control Tab ® Input Port Control Input Source Select: This control allows the user to select which port the data will enter the decoder from.
  • Page 42 5782DEC Professional H.264 and MPEG-2 Decoder Gratuitous ARP Address: When Gratuitous ARP is enabled, the Decoder Data port will ARP for the IP address provided at an approximate 2 minute interval. A suggestion is to enter the default gateway of the subnet. This will refresh the switches’ MAC address table and help to prevent a unicast flood scenario.

  • Page 43: Figure 5-6: Webeasy - Decoder Input Control Tab Continued

    5782DEC Professional H.264 and MPEG-2 Decoder IGMPv3 Mode: This control allows the user to enable the use of the IGMPv3 mode. IGMPv3 SSM Control <1-6>: This control allows the user to set the IP addresses to be used while forming the source filter for IGMPv3 communications.
  • Page 44 5782DEC Professional H.264 and MPEG-2 Decoder Audio Control Audio Delay <1-8>: This parameter allows the user to add a delay to the audio to synchronize the audio and the video stream. This can be done by sliding the audio delay to the desired setting, to a maximum of 50ms for each of the 8 audio streams.

  • Page 45: Decoder Monitor

    5782DEC Professional H.264 and MPEG-2 Decoder 5.4. DECODER MONITOR Figure 5-7: WebEASY – Decoder Monitor Tab ® Input Monitor Input Status: This parameter returns the status of the input video. Input Bitrate: This parameter returns the bitrate of the input video in kbps.

  • Page 46: Decoder Audio Monitor

    5782DEC Professional H.264 and MPEG-2 Decoder Video PID: This parameter displays the Video Packet ID (PID). The video PID allows the decoder to sort the video packets in the transport stream to organize them for output in kbps. Video Bitrate: This parameter displays the video bitrate of the associated video stream.

  • Page 47: Decoder Output Control

    5782DEC Professional H.264 and MPEG-2 Decoder Audio Monitor Audio PID Number: This parameter displays the Audio Packet ID (PID) number for the audio stream that is being decoded. Audio Bitrate: This parameter displays the audio bitrate for the audio stream that is being decoded.

  • Page 48: Decoder Anc Data Control

    5782DEC Professional H.264 and MPEG-2 Decoder Private Data Output Control Data Output: This parameter allows the user to enable data output from the decoder. Destination IP Address: This parameter allows the user to set the destination IP address of the output data.
  • Page 49 5782DEC Professional H.264 and MPEG-2 Decoder CC708 Insert Line: This parameter allows the user to select the line on which to insert the CC708 for ANC services. AFD SD Insert Line: This parameter allows the user to select the AFD insertion lines for SD video.

  • Page 50: Decoder Anc Monitor

    5782DEC Professional H.264 and MPEG-2 Decoder VANC VPTS: This parameter allows the user to enable or disable VANC VPTS. 5.8. DECODER ANC MONITOR Figure 5-11: WebEASY – Decoder ANC Monitor Tab ® Decoder ANC Monitor CC Type: This parameter displays the type of embedded closed captions used in the output.

  • Page 51: Sfp-Asi Transmit Control

    5782DEC Professional H.264 and MPEG-2 Decoder 5.9. SFP-ASI TRANSMIT CONTROL Figure 5-12: WebEASY – SFP Transmit Control Tab ® SFP Transmit Control SFP Transmit Output: This parameter allows the user to set the mode of the SFP transmit feature, to enable or disable transmitting on a specific output.

  • Page 52: Inband Control

    5782DEC Professional H.264 and MPEG-2 Decoder 5.10. INBAND CONTROL Figure 5-13: WebEASY – Inband Control Tab ® Inband Control Time Source Select: This parameter allows the user to set the time source to be used when checking if a firmware upgrade is needed for an upgrade image with a timestamp.

  • Page 53: Faults

    Professional H.264 and MPEG-2 Decoder 5.11. FAULTS The 5782DEC has a Fault Page where the following information can have traps set and will display if there is a fault present. Red indicates there is a fault present and green indicates there is no fault present.
  • Page 54 5782DEC Professional H.264 and MPEG-2 Decoder This page left intentionally blank Page - 44 WEBEASY Revision 1.0...

  • Page 55: Upgrade Procedures

    UPDATING VISTALINK PRO SERVER JAR FILE Products from Evertz are constantly evolving and new features are often added. It is therefore important to update the JAR files in use to provide access to all the latest features or enhancements. It will also be necessary to add JAR files for new products.

  • Page 56: Figure 6-2: Vistalink Pro - Applying Jar Updates

    5782DEC Professional H.264 and MPEG-2 Decoder A window will appear, as shown in Figure 6-2. Navigate to the location of the new JAR file and double click to select the file. The window will automatically close and the update will be applied in the background.

  • Page 57: Firmware Upgrade

    When first visiting the 5782DEC web interface, the user will be asked to enter a Login and Password. Enter “customer” for Login and “customer” for Password. On the top of the web page for the 5782DEC, there is a tab labelled Upgrade. The Upgrade tab is used to check current firmware version and upload the latest firmware.

  • Page 58: Figure 6-4: Webeasy - Firmware Upgrade Menu

    5782DEC Professional H.264 and MPEG-2 Decoder Figure 6-4: WebEASY – Firmware Upgrade Menu ® Check the box under the Upgrade column, and click Choose File to locate the image file. Once selected, click Open to advance to the next step.

  • Page 59: Figure 6-5: Webeasy - Locating The Image File

    5782DEC Professional H.264 and MPEG-2 Decoder Figure 6-5: WebEASY – Locating the Image File ® Click Upgrade and watch the progress bar for the status. Once completed, the device will automatically restart. UPGRADE PROCEDURES Page - 49 Revision 1.0...

  • Page 60: Firmware Upgrade Using Vistalink

    570FC frame controller and ® the 5782DEC. Ensure that the 5782DEC is running the latest firmware, to check this simply right click on the card’s address in VLPRO Client and select Version Information as shown in Figure 6-7. Figure 6-6: VistaLINK - Selecting Version Information ®...

Table of Contents