evertz 4025TR Instruction Manual page 9

5550 End
Parallel I/O
(Male 9 pin D)
Frame Gnd
BIPH 1
GND
BIPH 2
GND
TLC End
(Female 25 pin D)
GPO
Gnd
Figure 4: Cable to Connect Sony Vialta Biphase to 4025TR
The telecine type item on the KeyLog TRACKER™ Telecine Setup screen must be set to Sony Vialta.
The film frame handling will be set to "Latch Negative Transition" Style when you set the Vialta Telecine
type.
2.1.4 Verifying the Connections to a Sony Telecine
When you have completed the basic telecine connections, you will need to verify the frame accuracy of
the basic system using the procedure in section 2.11.7 of the 4025TR manual or section 1.4.4 and
1.4.5 of the K L
EY OG
proceed to the KeyKode reader installation outlined in section 2.13 of the 4025TR manual.
Date of Issue: June 6, 2001
--drain--
3 --Pair 1--
6 --Gnd 1--
7 --Pair 2--
6 --Gnd 2--
J16
2 --------
14 --------
TRACKER™ manual. Once you have verified the basic connections, you may
Model 4025TR Film Footage Encoder Manual
4025TR Manual Change Sheet 1.0-2
4025TR End
Parallel I/O
(Male 9 pin D)
Frame Gnd --drain--
Film Rate 1
FRID/SOF 2
BIPH 1 3 --Pair 1--
GND 6 --Gnd 1--
PreSTOP 4
Load Film 5
BIPH 2 7 --Pair 2--
GND 6 --Gnd 2--
DLO GPI 8
GND 6
GAUGE 9
Sony End
Aux 6
(Male 9 pin D)
Frame Gnd Shld
tach10B- 6
Ground 4
tach10A- 9
Ground 4
Page 5 of 6