How To Verify That Your Keykode Is Updating Logical Keykode Generator Numbers; Displaying Status Information From The Film Barcode Reader - evertz 4025TR Instruction Manual

!
OPERATION
3.11.2 How to verify that your KeyKode is Updating Logical KeyKode
Generator Numbers
Use the Film tab of the Configuration screen to select the dropout delay for
the KeyKode reader. The Status window also shows when the KeyKode
reader has stopped updating the edge numbers.
When using an external barcode reader it is important to know if the edge
numbers being displayed in the 4025TR are being updated from the
barcodes, or only from the telecine biphase. The KK CHECK item on the
setup menu enables a visual indicator in the character inserter when the
KeyKode is not updating.
Press the SETUP key to access the setup menu. Using the " & # keys
drop down the FILM menu. Use the $ & % keys to highlight the KK
CHECK menu item and press the SELECT key to show the KK CHECK
sub menu. The currently programmed KeyKode check mode is shown in
reverse video. Press the $ & % keys to select the desired mode. Press
the SETUP or CLR keys to exit the setup menu, or press the SELECT key
to return to the FILM drop down menu.
With KEYINFO CHECK the 4025TR will change the font of the Key info
part of the film edge number window when 4025TR detects that the
barcode information is missing, and the edge numbers are being updated
only by the telecine biphase. In the Tiny character size, the Key Info part of
the edge number will be shown in inverse video.
detected when no barcode information has been received for the number of
feet of film travel set in the CHECK DELAY parameter, or KK JAM is set to
NEVER. With KEYINFO ON the font of the key info will be the same as the
rest of the numbers. With KEYINFO OFF the key info will be blanked and
only the footage and frames will be displayed.
information on setting the CHECK DELAY).
It is highly recommended that you operate the 4025TR with KEYINFO CHECK

3.11.3 Displaying Status Information from the Film Barcode Reader

The Status window shows the same information as the KKSTATS display.
The Film Barcode status information display is controlled from the
KKSTATS item of the Toolbox DEBUG menu. There are five pieces of
information contained in the status line that can be used to verify correct
Model 4025TR Film Footage Encoder Manual
Barcode missing is
(See section 3.7.3 for
Page 3-58