Novram Debug - evertz 4025TR Instruction Manual

5.5 NOVRAM DEBUG

!
SYSTEM DIAGNOSTICS
The Front panel display shows key scan codes, Key Down timer, and the
Key Repeat timer
" & #
select slot :0=611, 1=615, 2=632, or Off
$ & %
change starting address by 1
SHIFT + $ & % change starting address by 10 Hex
SELECT toggles between internal and external RAM data spaces
( 615 and 632 only)
SHIFT + * will toggle in and out of RAM VIEW ENTRY MODE when RAM
VIEW is enabled
When RAM VIEW is enabled, and not in RAM VIEW - ENTRY mode, all the
normal keyboard functions operate normally.
The Nonvolatile memory (NOVRAM) diagnostic display is shown in the
character inserter. This display is used to aid in troubleshooting problems
in the field and is not used during normal operation or maintenance
procedures. The NOVRAM VIEW item of the Toolbox DEBUG menu is
used to turn NOVRAM DEBUG on and off.
Proceeding with the NOVRAM VIEW will allow the user configured
parameters including KeyKode head offsets horizontal char size, user
configurations, etc. to be overwritten. PROCEED WITH CAUTION!!!
When you have selected the NOVRAM VIEW item of the DEBUG menu,
use the # key to enter the NOVRAM VIEW mode. In this mode a menu
page appears showing the keystrokes that are active.
1, 2, 3, or 4 view
one of the four NOVRAM pages.
Model 4025TR Film Footage Encoder Manual
NOVRAM DEBUG
1 - VIEW PG 1 - VIEW PG 2
3 - VIEW PG 3 - VIEW PG 4
SHIFT +
0 - CLR TO 00 5 - SET TO FF
6 - DEFAULTS 7 - REBOOT
* WARNING - SOME KEYS WILL
ALTER 4025TR PARAMETERS
PRESS KEY FOR DESIRED FUNCTION
Page 5-9