Table of Contents
Advertisement
7700 MultiFrame Manual
7700DA4-SLKE(-HD) HD/SD-SDI StreamLINK® MPEG-2/H.264 Encoder over IP
2.
INSTALLATION
The 7700DA4-SLKE and 7700DA4-SLKE-HD modules each come with a companion rear plate that
occupies one slot in the frame. For information on inserting the module into the frame, see section 3 of
the 7700FR chapter.
Figure 2-1: 7700DA4-SLKE & 7700DA4-SLKE-HD Rear IO Module
CONNECTIONS
2.1.
2.1.1. 7700DA4-SLKE Connections
SDI INPUT:
Input BNC connector for 10-bit component serial digital video signal compatible with the
SMPTE 259M standard. See section 4.1 for information on selecting the correct video
standard.
SDI OUTPUT:
There are four BNC connectors with reclocked serial component video outputs,
compatible with the SMPTE 259M standard.
ETHERNET:
Port A is UNUSED. Port B is used for the output stream and to simultaneously connect
to the configuration web-server on the card.
Page - 2
Revision 1.2
Advertisement
Table of Contents
