Selecting The Film Gauge - evertz 4025TR Instruction Manual

!
FILM TYPE
35 MM 4 PERF
35 MM 3 PERF
16 MM 20 FR/KEY
16 MM 40 FR/FT
EXTNDED TYPE
!
OPERATION
Barcode missing is detected when no barcode information has
been received for greater than the number of feet set in the
CHECK DELAY parameter of the Toolbox menu, or KK JAM is
set to NEVER. (See section 3.7.3 for information on setting the
CHECK DELAY window.)
It is highly recommended to use INFO CHECK, so that KeyKode reading
problems can be identified and corrected immediately.
3.4.3

Selecting the Film Gauge

Use the Film Tab of the Configuration screen to set the film type.
FILM TYPE Is used to select the film stock gauge and the number of film
frames per key number. Some of the items shown are only
enabled when you have optional software installed.
Select 35 MM 4 PERF if you are using normal 4 perf 35 mm film
stock.
Select 35 MM 3 PERF if you are using normal 3 perf 35 mm film
stock. (Only available when 3 perf option is enabled)
Select 16 MM 20 FRMS/KEY if you are using 16 mm film stock
with key numbers every 20 perforations.
Select 16 MM 40 FRMS/KEY if you are using 16 mm film stock
with key numbers every 40 perforations.
EXTNDED TYPE indicates that the K
software has enabled a film type that is not supported in the
Local mode of the 4025TR. (These additional film types are
available from K
65mm options are enabled)
TYPE from the menu system.
16 MM 40 FRM/KEY should NOT be used with KeyKode readers.
Model 4025TR Film Footage Encoder Manual
L TRACKER™ when the 35mm 8 perf or
EY OG
You can not select EXTNDED
L TRACKER™
EY OG
Page 3-21