Table of Contents
Advertisement
HORZ CHAR SIZE
HORIZONTAL
CHAR SIZE = 10
DISPLAY LEVEL
FRONT PANEL
BRIGHTNESS = 2
BI PHASE RATE
1 PPF
2 PPF
5 PPF
10 PPF
OPERATION
3.6.1
Adjusting the Horizontal Character Size
Use the Hardware tab of the Options screen to set the horizontal character
size.
HORZ CHAR SIZE
# keys to adjust the right side of the raster
3.6.2
Adjusting the Front Panel Display Brightness
Use the Hardware tab of the Options screen to set the Front panel display
brightness.
DISPLAY LEVEL
display. Use the $ & % keys to adjust.
3.6.3
Selecting the Telecine Biphase Rate
Use the Telecine Setup screen to set the biphase rate. When you select a
telecine type, the biphase rate parameter is set to the default value.
BI PHASE RATE
film frame. See section 2.11.2 or 2.12.2 for information about
connecting biphase from your telecine.
3.6.4
Selecting the Telecine Type
Use the Telecine Setup screen to set the Telecine Type. When you select a
telecine type, the biphase rate and frame handling parameters are set to their
default values.
Model 4025TR Film Footage Encoder Manual
Is used to adjust the character width. Use the " &
Is used to adjust the brightness of the front panel
Is used to select the number of biphase pulses per
Page 3-28
Advertisement
Table of Contents
