Overview Of The Shifted Key Functions - evertz 4025TR Instruction Manual

OPERATION
CHAR GEN MODE Initiates VCG window select mode and highlights the
selected window. Use the arrow keys to move the window, use
the CHAR GEN ON / OFF key to turn the window on or off.
Pressing the MODE key again selects the next VCG window,
etc. Press CLR to exit the window select mode.
CHAR GEN ON / OFF Turns the character generator ON and OFF. When
in the VCG window select mode, it is used to turn individual
windows ON and OFF.
LOCAL Displays a message on the front panel to indicate whether the
4025TR is in Local or Remote mode. When the 4025TR is in
Local mode press SHIFT + LOCAL to put the 4025TR into
Remote mode.
pushbutton group are active. Pressing any other key will display
a message "IN REMOTE MODE!" on the front panel. When the
4025TR is in Remote mode press SHIFT + LOCAL to put the
4025TR in to Local mode.
GEN RUN / HOLD Alternately starts and stops the generator time when
the generator is in the RUN EDGE mode.
HELP Displays error messages from the last error on the character
inserter.
STATUS Displays a status screen on the VCG, which summarizes the
current operational
SHIFT + STATUS displays the firmware versions of each
module installed in the 4025TR on the character generator
screen.
VITC Turns the VITC generator ON and OFF. A status indicator to
the left of this key shows whether the VITC generator is On or
Off.
3.1.5

Overview of the Shifted Key Functions

When the SHIFT key is held down the standard meanings of many of the
keys are modified. Following is an overview of the main shifted functions.
STATUS Displays software revisions on the Character inserter.
LOCAL Toggles the 4025TR into Local or Remote mode.
SETUP Toolbox menu.
CLEAR Reset Help error messages.
SHIFT+* Toggles RAM VIEW ENTRY MODE when RAM VIEW is
enabled.
Model 4025TR Film Footage Encoder Manual
In remote mode, only keys in the Display
modes of the 4025TR. Pressing
Page 3-5