Table of Contents
Advertisement
7700 MultiFrame Manual
7735CEM Composite Encoder with Monitoring
2.
INSTALLATION
The 7735CEM modules come with a companion rear plate and occupies one or two slots in the 7700FR
frame. Figure 2-1 shows a picture of each of the rear panels. For information on mounting the rear plate
and inserting the module into the frame see the 7700FR chapter section 3.
The 7735CEM cards must be inserted into slots with the correct rear panel. Some cards have physical
differences and some have functional differences and the associated labels will be misleading.
2.1.
VIDEO IN AND OUT
Connect a source of component serial digital (525 or 625 line) video to the top BNC labeled SDI INPUT.
Connect a reference black signal to the REF BNC. Broadcast quality composite analog video is available
on the ANALOG OUT BNC. Monitoring quality video with text and audio bar graphs are available on the
MON OUT output BNC. If the card is not present or the power is off, there will be nothing on any of the
outputs.
7735CEM-4
Gray background indicate un-implemented or un-tested features
Figure 2-1: 7735CEM Rear Panels
Revision 1.1.1
Advertisement
Table of Contents
