Automatic Head Offset Learning - evertz 4025TR Instruction Manual

"
4015
!
INSTALLATION

2.13.5 Automatic Head Offset Learning

During the head offset learning procedure, you will be presented with
several screens in succession to guide you through the calibration process.
On a piece of
bar-coded film stock, select a reference frame that is beside one of the
barcodes. (The reference frame is located beside the reference dot of the
barcode.) Identify this frame with a punch mark or grease pencil. Use the
# & $ keys to select the perf that corresponds to the perf of the reference
frame. Press SELECT to continue.
Improperly identifying the orientation of the reference dot to the perforations
("PERF type") may cause errors to be introduced into the footage numbers.
The 4025TR's PERF numbering scheme has been changed from the 4015 so
that it conforms to the industry standard head to tails orientation. The on
screen graphic display accurately shows the KeyKode perf orientation so as
to avoid confusion.
Thread this film onto the telecine, and place the reference frame in the
gate.
Model 4025TR Film Footage Encoder Manual
TIMECODE FILM
REFERENCE FRAME PERF = 1
T
A
I
L
# $ TO CHANGE PERF TYPE
CONFIG
H
E
A
D
Page 2-31