Configuring The Vcg Field And Symbol Displays - evertz 4025TR Instruction Manual

!
VCG FIELDS
OFF
ON
VCG SYMBOLS
OFF
ON
OPERATION
in the full stop condition. (See FULL STOP item above). Also
see section 3.7.4.
When OFF is selected (the factory default setting) the 4025TR
will only re-frame its biphase information when edge numbers or
absolute frames are entered from the front panel, or when the
centering remote input is closed to ground.
AUTO CENTRE is not supported in KeyLog TRACKER™.
It is recommended that the AUTO CENTRE setting be left in the Off position
for the best results of accuracy.
When ON is selected the 4025TR will re-frame its biphase
information each time that the telecine achieves a FULL STOP
condition.
3.7.6

Configuring the VCG field and Symbol Displays

Use the Window tab of the configuration screen to control the fields and
symbols of the character windows.
VCG FIELDS Is used to select whether the field indicators will be used in
the character inserter.
When OFF is selected the 4025TR field indicators on the time
displays will be turned off.
When ON is selected (the factory default setting) the field
indicators on the time displays will be on if the data being
displayed is from a VITC source.
VCG SYMBOLS
symbols will be used in the character inserter. Each symbol
character takes up one additional character in the window size
so some users may wish to turn off the symbols to simplify the
display.
Model 4025TR Film Footage Encoder Manual
Is used to select whether the VCG window identifier
Page 3-33