Table of Contents
Advertisement
5.7 ENGINEERING SHORTCUT KEYS
SYSTEM DIAGNOSTICS
Running the telecine forward or reverse by a specific number of
frames (or feet) and checking the value again when the telecine
is stopped will enable the user to see if the biphase counter is
accurately tracking the film position on the telecine.
counter rolls to 0000 after 4095.
In PLAY or SHUTTLE modes, the actual number would be
changing so rapidly that it would not provide any useful
information. Therefore, the number shown is the number of
biphase pulses received per nominal film frame (1/24th of a
second at 24 FPS, etc.). A star (*) will be displayed beside the
number to indicate that the delta value is being displayed. The
normal value at PLAY speed will be * 28 (hex = 40 decimal) for
telecines with 10 pulse per frame biphase outputs.
EV-RST
contains communications codes for the three processors in the
4025TR. An Evertz technical support person may ask you for
this value.
EV-SAV
contains initial communications codes for the three processors
in the 4025TR. The high nibble shows the EVCOM reset code.
An Evertz technical support person may ask you for this value.
615 PLL
is a hexadecimal measurement of the 615 phase lock loop. The
nominal value for PAL is 9600 and for NTSC is 7D00.
Evertz technical support person may ask you for this value.
HIGHWTR this value shows the amount of RAM (in hex) for each card that
has never been used. An Evertz technical support person may
ask you for this value.
The following engineering shortcut keys are activated by pressing the
TIME/UB key and the SHIFT key plus the indicated key:
0
Reset Character windows to default position, turns on all
windows
1
Reset Horizontal Char size to the minimum
2
Reset 632 (right) board to factory defaults, and reboot
3
Reset 615 (centre) board to factory defaults, and reboot
4
Reset all boards to Factory defaults, and reboot
5
Reserved
6
Reserved
7
Freeze VCG updates
8
Display entire small character font
9
Display entire tiny character font
HELP
Reboot
STATUS
Hardware Debug Display
Model 4025TR Film Footage Encoder Manual
The
An
Page 5-11
Advertisement
Table of Contents
