Table of Contents
Advertisement
!
3.8 TURNING ON DIAGNOSTICS AIDS - THE DEBUG MENU
KK STATS VIEW
OFF
ON
RAM VIEW
OFF
ON
NOVRAM VIEW
TO DEBUG NOVRAM
PRESS THE # KEY
!
OPERATION
When you have selected LEVEL, the front panel control of the
VCG windows is disabled.
You can only control the windows from the remote control port in the LEVEL
mode.
3.8.1
Displaying KeyKode Status Information
The Status window shows the same information as the KKSTATS display of
the 4025TR.
KK STATS VIEW
diagnostic display will be shown in the character inserter. See
Figure 3-10 of the manual for further information about the KK
STATS window.
3.8.2
Displaying RAM Diagnostics
RAM VIEW
diagnostic display will be shown in the character inserter. This
display is used to aid in troubleshooting problems in the field
and should not be used during normal operation or maintenance
procedures. When you exit the toolbox menu with RAM VIEW
turned ON, (a special window appears at the top of the screen
which indicates that you are in RAM VIEW - ENTRY MODE.)
See section 3.8.2 for a complete description of RAM VIEW
mode.
3.8.3
Displaying Non Volatile Memory Diagnostics
NOVRAM DEBUG
(NOVRAM) diagnostic display will be shown in the character
inserter. This display is used to aid in troubleshooting problems
in the field and is not used during normal operation or
maintenance procedures.
Proceeding with the NOVRAM VIEW will allow the user configured
parameters including KeyKode head offsets, horizontal char size, user
configurations, etc. to be overwritten. PROCEED WITH CAUTION!!!
Model 4025TR Film Footage Encoder Manual
Is used to select whether the KeyKode status
Is used to select whether the internal data memory (RAM)
Is used to select whether the Nonvolatile memory
Page 3-35
Advertisement
Table of Contents
