How To Use This Manual; Figure 1-1: Dailies Transfer Using Keykode - evertz 4025TR Instruction Manual

1.1 HOW TO USE THIS MANUAL

OVERVIEW
Footage Encoder. The six keys in the Setup key group (SETUP, SELECT,
!, ", #, $) are used to cycle through the various items on the
programming menu. The 4025TR menu system consists of three drop
down menus. The TIMECODE drop down menu is for overall operation
modes such as selecting which information is put into the time and user
bits, drop frame mode for the generator, setting reader modes, setting
VITC line numbers, etc. The FILM drop down menu is used to set up
specific film number modes such as KeyKode Jam, film type, film transfer
rate, etc. The CONFIG drop down menu is used to configure
miscellaneous items such as video standard, character size and style,
KeyKode head offset, video path delays, etc.
Figure 1-1 below gives an overview of how a typical dailies transfer using
KeyKode would be done using the 4025TR.

Figure 1-1: Dailies Transfer Using KeyKode

This manual is organized into 9 chapters: Overview, Installation, Operation,
Optional Software System Diagnostics, Technical Description, Connector
Pinouts & Cable Diagrams, Keykode Reader Installations and Film
Emulsion Codes
If you are currently an owner of the Evertz 4015 or 4025 Film footage
Encoder, you will find that much of the installation is similar for the 4025TR.
Items that are of particular note for 4015 or 4025TR users are marked with
the one of these symbols in the margin.
Model 4025TR Film Footage Encoder Manual
Page 1-4