2.
INSTALLATION
2.1.
REAR PANEL
The following sections describe the purpose of the rear panel connectors of the 3410. Sections 2.1.1 to
2.1.2 describe the specific generator, reader, character inserter, and telecine signals that should be
connected to the 3410.
2.1.1. Video Connections
Figure 3: Video Inputs and Outputs for One Channel
SDI IN
Input BNC connector for component serial digital video signals, compatible with the
SMPTE 259M-C standard.
SDI OUT Ontput BNC connector for serial component video. This video is a reclocked output from the
SDI IN connector
COMP
These 2 BNC connectors are a composite analog output derived from the SDI input video
and are normally connected to an anlog monitor or video recorder. When the input video is
in the 525 line format the analog output will be NTSC. When the input video is in the 625
line format the analog output will be PAL.
Figure 2: Rear Panel
Revision 1.2
Model 3410 Multivert Manual
Page 2