Data Entry Pushbutton Group - evertz 4025TR Instruction Manual

!
OPERATION
KKODE Displays the film edge number generator. When reading Film
edge numbers with a KeyKode reader, this display shows the
complete key number. When the 4025TR is not receiving data
from a KeyKode reader, this display shows the current edge
number updated from the telecine biphase, and is initialized
using the data entry key group.
VRDR Displays the time of the VITC Reader. Pressing the TIME / UB
key will alternately display the user bits.
LRDR 1 Displays the time of the LTC Reader. Pressing the TIME / UB
key will alternately display the user bits.
LRDR 2 Is for a future option. At this time it displays the same
information as LRDR 1.
alternately display the user bits.
TIME/UB Selects whether time or user bit data is being displayed on the
front panel alphanumeric display. When the KeyKode or Ink
number registers are being displayed, it selects whether the
Prefix or full number is being displayed.
3.1.2

Data Entry Pushbutton Group

The data entry keypad consists of the ten dual function keys, the SHIFT,
ENTER and CLR keys. The Data entry pushbuttons are active only when
the 4025TR is in Local mode. In their normal functions, the dual function
keys control what data is being displayed on the front panel. When the
ENTER key is pressed, these keys are changed to their numeric values
and are used for numeric entry into various timecode and film edge number
registers. Pressing the SHIFT key and the numeric keys 0 to 5 will enter
the corresponding hexadecimal values A to F when entering user bits.
When the 4025TR is in data entry mode, the left characters of the display
blink, indicating that the numeric keys are active.
ENTER The ENTER key is used to initiate data entry modes to the
register currently displayed on the front panel. Pressing the
ENTER key after numbers have been entered into the display
window accepts the entered value, and presets the value into
the register.
CLR The CLR key is used to terminate the data entry modes. Values
entered into the display are discarded, and the register is
restored to its previous value. The CLR key is also used to exit
the setup menu system.
Model 4025TR Film Footage Encoder Manual
Pressing the TIME / UB key will
Page 3-3