Table of Contents
Advertisement
OPTIONAL SOFTWARE
register. Press the vertical arrow keys (", #) while holding
down the SHIFT key to trim the ARRI OFFSET register. As you
adjust this register, the AERR value on the ARRI STATS display
should become 00. The ideal situation is that the ASFERR
value on the ARRI STATS display should also become 00.
4.4.7
Bit vs. 112 Bit reading
The 611 LTC reader in the 4025TR needs to be specifically programmed
for reading either 80 bit (form B) or 112 bit (form C) type code. To do this,
there are two Hot Keys made available. To activate the Hot keys, press
the TIME/UB key and the SHIFT key at the same time as the JAM or VITC
ON/OFF keys.
TIME/UB + SHIFT + JAM
TIME/UB + SHIFT + VITC
A message will be displayed on the front panel to indicate if 112 Bit reading
mode is enable or not
Model 4025TR Film Footage Encoder Manual
Enable ARRI 112 bit mode
Enable ARRI 80 bit mode
Page 4-12
Advertisement
Table of Contents
